The SV-5400 is a composite video, LCD projection system designed for MR use. The 5400 system accepts NTSC/PAL video inputs, or VGA inputs using the optional VGA converter. The SV-5400 system includes an LCD projector, typically located at the rear of the magnet, and a video interface/power supply located in the control room. The projector displays images on a rear projection screen that hangs in the bore. The patient views the projected images using a coil-mounted mirror.

The projector is mounted on a mobile stand that can be easily moved. The In-bore™ screen attaches to inside of the bore using Velcro mounts that can also be easily removed. The video signal is relayed from the video interface to the projector over a fiber optic link to ensure EMI immunity. DC power is supplied over a hard-wired cable that passes through a filter on the penetration panel.

Components

• Video Interface and Power Cord
  
• Color LCD Projector
  
• Projector mount
  
• Fiber Optic Cable between Video Interface and Projector
  
• DC Power Cable from the Video Interface to penetration panel
  
• DC Power Cable from penetration panel to projector
  
• Penetration panel RF filter
  
• Screen Assembly
  
• Mirror, if needed

Physical
Video Interface, 5.5” H x 9.75” W x 13”L”, 15 lbs.; Projector, 5”OD x 6” L, 3.5 lbs (not including lens); magnetically inert.

DC power cable (circular connector): 0.8” (min diameter clearance)
Fiber optic cable: 0.4” simplex / 0.8” duplex (min diameter clearance)

Video Inputs
Composite Video (NTSC/PAL)

Electrical
110 V/50-60 HZ, 2.5 Amps or 230 V/50 Hz, 1.3 Amps.

Cabling
Power Cable, 2 shielded twisted pairs, 200’ (max); Fiber Optic Video Cable (ST connectors), 200’ (max); 3-wire grounded cord, 7 feet.

Colors
Housings / mount: pearl white, charcoal gray accents.

 

NEED SYSTEM DIAGRAMS HERE.